GASOLINE AND DIESEL ENGINES SPECIFICATIONS

____________________________________________________________________________________

Home / Car Engines / BMW Engines / BMW M52B25TU

BMW M52B25TU Troubleshooting

Engine starts hard or doesn't start

Empty fuel tank - Fill fuel up.
Wrong fuel grade - Change gasoline.
Air in fuel system - Bleed fuel system.
Spark plug wiring connection is damaged - Check the spark plug wire connection, repair or replace.
Spark plug is damaged - Install new spark plug.
Defective ignition system - Check ignition system and replace faulty parts.
Fuel filter is clogged - Fuel filter needs changing.
Fuel lines clogging - Clean fuel system lines.
Dirty or damaged fuel pump - Service or replace fuel pump.
Fuel injectors are faulty or clogged - Inspect fuel injectors and change as required.
Engine has bad compression - Check cylinder block and change wear parts.

Irregular engine running

Defective ignition system - Check ignition system and replace faulty parts.
Air filter element is plugged - Replace or service air filter.
Spark plug is faulty - Spark plug need to be replaced.
Fuel pump is faulty or clogged - Check fuel pump and replace if necessary.
Improper valve clearance - Adjust valve clearance according to specifications.
Ignition timing is wrong - Adjust ignition timing as required.
Wrong adjustment of low idle speed - Correct idle adjustment.

Engine starts and stops immediately

Faulty spark plug - Change spark plug.
Dirty or damaged fuel injectors - Inspect fuel injectors and change as required.
Ignition coil is defective - Ignition coil must be replaced.
Worn or loose valve springs - Install new valve springs.
Valves are stuck - Clean the valves.

Engine overheats

Engine oil level is insufficient - Fill the crankcase with engine oil.
Engine is under excessive load - Load reducing required.
Dirty fuel injectors - Service or replace fuel injectors.
Ignition timing is incorrect - Adjust ignition timing as required.
Incorrect valve setting - Set the valves properly.
Defective radiator cap or clogged radiator core - Clean radiator or change cap.
Lack of engine coolant - Add coolant and check the components of cooling system.
Defective thermostat - Thermostat need to be replaced.
Damaged water pump - Install new water pump.

Engine knocking sound or abnormal noise

Stale gasoline - Use proper gasoline.
Excessive engine load - Reduce load.
Lack of engine oil - Fill up the engine oil.
Low idle speed setting is incorrect - Adjust idling as required.
Dirty or damaged fuel pump - Clean or replace fuel pump.
Worn main bearings or crankshaft - Have bearings or crankshaft replaced.
Valve clearance is improper - Check and adjust.
Cylinder bore or piston rings are damaged - Replace faulty components.

Low engine power

Clogged or damaged fuel injectors - Clean or change fuel injectors.
Air filter is blocked - Clean or replace air filter.
Dirty or damaged fuel pump - Check fuel pump and replace if necessary.
Defective ignition - Inspect ignition system and change faulty parts.
Cylinder head gasket is blown - Cylinder-head gasket replacement required.
Stuck or burned valves - Change or clean valves.
Worn cylinder block parts - Defective parts need to be replaced.
Oil filter is dirty - Replace or clean oil filter.

High fuel consumption

Air filter is blocked - Replace or clean air filter.
Fuel injectors are clogged or faulty - Clean or change fuel injectors.
Spark plug is loose or faulty - Re-tighten or change the spark plug.
Ignition timing is improper - Ignition timing needs to be adjusted correctly.
Stuck, worn, or burned valves - Service or change valves.
Worn sleeve, rings, or piston - Replace faulty parts as required.
Valve clearance is improper - Adjust to proper valve clearance.
Engine has bad compression - Check cylinder block and change wear parts.

Excessive engine oil consumption

Damaged gaskets or seals - Replace to repair leaks.
Damaged valve stems or valve guides - Change the valves.
Damaged or seized piston rings - Piston rings need to be replaced.
Scored cylinder liner or piston - Inspect piston and liner, replace as required.

Engine backfires

Clogged fuel injectors - Service or change fuel injectors.
Fuel lines clogging - Fuel lines must be clean.
Wrong ignition timing - Ignition timing needs to be adjusted correctly.
Valve setting is incorrect - Valves needs to be set correctly.
Clogged air filter - Clean or replace air filter.

____________________________________________________________________________________

____________________________________________________________________________________